U-Boot 1.1.5.0.alpha-svn1585 (Apr 26 2010 - 11:21:38) CPU: IKANOS Fusiv 160 Family - Reset reason: Power ON DRAM: 64 MB Flash: 16 MB *** Warning - bad CRC, using default environment PCI: Bus Dev VenId DevId Class Int 00 01 168c 001d 0200 19 In: serial Out: serial Err: serial Net: voxEmac0voxEmac1 Press ENTER twice to stop autoboot in 2 seconds Found valid Openrg image at address 0xBF060000, counter 55, image section 2, hea der address bf43ff6c Found valid Openrg image at address 0xBF440000, counter 56, image section 3, hea der address bff1ff6c Choose Openrg image in flash section 3/7 as active ## Booting kernel from Legacy Image at bf440000 ... Image Name: Argo Created: 2011-03-25 14:35:57 UTC Image Type: MIPS Linux Kernel Image (uncompressed) Data Size: 8780300 Bytes = 8.4 MB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................. ................................................................................ ................................................................................ ................................................................................ ..............................Ok Booting the kernel Linux version 2.6.16.26 #1 Fri Mar 25 15:35:22 CET 2011 CPU revision is: 6836c400 Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Built 1 zonelists Kernel command line: root=/dev/mtdblock2 rw rootfstype=jffs2 Primary instruction cache 16kB, linesize 32 bytes. Primary data cache 8kB, linesize 32 bytes. Synthesized TLB refill handler (17 instructions). Synthesized TLB load handler fastpath (31 instructions). Synthesized TLB store handler fastpath (31 instructions). Synthesized TLB modify handler fastpath (25 instructions). PID hash table entries: 512 (order: 9, 8192 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 53528k/65536k available (2308k kernel code, 11952k reserved, 327k data, 124k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... unavailable. NET: Registered protocol family 16 Fusiv PCI: starting... SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub fs/cramfs_block_uncompressed created Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Random: 0x11726a53 Serial: 8250/16550 driver $Revision: 1.9 $ 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO map 0xb9020000 mem 0xb9020000 (irq = 6) is a 16450 PPP generic driver version 2.4.2 physmap flash device: 1000000 at 1f000000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available vox160-ehci-hcd vox160-ehci-hcd.0: Ikanos On-Chip EHCI Host Controller vox160-ehci-hcd vox160-ehci-hcd.0: new USB bus registered, assigned bus number 1 vox160-ehci-hcd vox160-ehci-hcd.0: irq 35, io mem 0x19230000 vox160-ehci-hcd vox160-ehci-hcd.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 200 4 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected vox160-ohci-hcd vox160-ohci-hcd.0: ADI VOX160 OHCI vox160-ohci-hcd vox160-ohci-hcd.0: new USB bus registered, assigned bus number 2 vox160-ohci-hcd vox160-ohci-hcd.0: irq 35, io mem 0x19240800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb 1-1: new high speed USB device using vox160-ehci-hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected usbcore: registered new driver usblp /home/ssalab/BUILD/REVISIONING/NETWORKING/RESIDENTIAL/SPIDER/ARGO95/src/rg/os/li nux-2.6/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. u32 classifier OLD policer on NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Freeing unused kernel memory: 124k freed Versions Main Software: EDF_1.3.19 WLAN firmware: 9.2.0 AP firmware: 5.8.0-james_04May10 DSL firmware: 5.5.1 DSP firmware: 5.8.0 UPNP firmware: 1.5.0 DLNA firmware: 1.5.0 Platform: ElsagDatamat ARGO 95 Distribution: FASTWEB_NGRG User Information: ssalab@els00usv04.servizi.elsag.it /home/ssalab/BUILD/REVISION ING/NETWORKING/RESIDENTIAL/SPIDER/ARGO95/src/rg insmod: add-symbol-file build/debug/fusivlib.o 0xc0016000 -s .data 0xc001d090 -s .bss 0xc001eac0 fusiv library initializing... Buffer Copy Through DMA is enabled fusiv library initialized SUCCESSFULLY insmod: add-symbol-file build/debug/bm.o 0xc0006000 -s .data 0xc0007560 -s .bss 0xc0007700 Initializing Buffer Manager Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0000 Load into BM APU successful insmod: add-symbol-file build/debug/timerlib.o 0xc0003000 -s .data 0xc0003740 -s .bss 0xc0003880 Timers are getting initalized Timers are initialized SUCCESSFULLY insmod: add-symbol-file build/debug/ethdriver.o 0xc0009000 -s .data 0xc000d940 - s .bss 0xc000fba0 eth0: Netpro Sierra Ethernet found at 0xb9110000, irq 14 ETH Hash table 4095 Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0010 eth1: Netpro Sierra Ethernet found at 0xb9150000, irq 13 ETH Hash table 4095 Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0020 Ethernet Driver is initialized SUCCESSFULLY insmod: add-symbol-file build/debug/dspvoice.o 0xc00b0000 -s .data 0xc00f7480 -s .bss 0xc00fa980 ***************************************************************** Using: Software Build(voice_2_6 : V1 VOICE ARCHITECTURE) 5.8.0 ***************************************************************** Total words found in /mnt/modfs/lib/modules/dsp218x_1ch_faxonly.dsp Image 31959 Total words found in /mnt/modfs/lib/modules/dsp218x_1ch_g723only.dsp Image 31959 Total words found in /mnt/modfs/lib/modules/dsp218x_1ch_g729only.dsp Image 31959 Total words found in /mnt/modfs/lib/modules/dsp218x_1ch_g711vad2only.dsp Image 3 1959 Total words found in /mnt/modfs/lib/modules/dsp218x_1ch_3wayonly.dsp Image 31959 fusiv_dsp: Registering Call Back Handlers ADSP218x download ver 1.1 done on DSP 0 ADSP218x download ver 1.1 done on DSP 1 insmod: add-symbol-file build/debug/periap.o 0xc0011000 -s .data 0xc0011da0 -s . bss 0xc0013480 periApDriverInit: done Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0030 LOAD firmware to AP: PERI_ID result: 0 Load into PERI_AP APU successful insmod: add-symbol-file build/debug/one_module.o 0xc017a000 -s .main_flow 0xc01b e190 -s .data 0xc01cc070 -s .bss 0xc01cdf40 Loading license 247e00204c4ed6bd5341cd5374226d1abbd0aec4b6fecfebb09a38933eebea90 05d7bee2887ce9b5956dc3c47aab4d49b875c616d9cf772d508f32bcdf0d590d1d9e8fbd63b015cf ac4bf3895e64040382e790b49fdecbb7452e4c45.ELSAG loading license key: ELSAG loading license key: ELSAG insmod: add-symbol-file build/debug/sysutil.o 0xc0026000 -s .data 0xc00281e0 -s .bss 0xc0028320 insmod: add-symbol-file build/debug/ath_hal.o 0xc005e000 -s .data 0xc007dad0 -s .bss 0xc00864e0 ath_hal: 0.9.14.25 (AR5212, RF2413, REGOPS_FUNC) insmod: add-symbol-file build/debug/wlan.o 0xc002a000 -s .data 0xc00562b0 -s .bs s 0xc0056920 wlan: 0.8.4.2 (Atheros/multi-bss) insmod: add-symbol-file build/debug/ath_rate_atheros.o 0xc0098000 -s .data 0xc00 9c850 -s .bss 0xc00a5300 ath_rate_atheros: Version 2.0.1 Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved insmod: add-symbol-file build/debug/ath_dfs.o 0xc00a7000 -s .data 0xc00aeb20 -s .bss 0xc00aec80 ath_dfs: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved insmod: add-symbol-file build/debug/wlan_wep.o 0xc0021000 -s .data 0xc0021f70 -s .bss 0xc00220a0 insmod: add-symbol-file build/debug/wlan_tkip.o 0xc0088000 -s .data 0xc008a760 - s .bss 0xc008a880 insmod: add-symbol-file build/debug/wlan_ccmp.o 0xc0000000 -s .data 0xc0001610 - s .bss 0xc0001740 insmod: add-symbol-file build/debug/wlan_xauth.o 0xc0058000 -s .data 0xc0058070 -s .bss 0xc00581a0 insmod: add-symbol-file build/debug/wlan_acl.o 0xc0024000 -s .data 0xc00248d0 -s .bss 0xc0024a00 wlan: mac acl policy registered insmod: add-symbol-file build/debug/ath_pci.o 0xc0239000 -s .data 0xc025b3a0 -s .bss 0xc025be60 ath_pci: 0.9.4.5 (Atheros/multi-bss) ath_pci: CR-LSDK-1.3.1.110-FASTPATH PCI: Enabling device 0000:00:01.0 (0000 -> 0002) ath_hal: changing RegDomain 0x0->0x37 Chan Freq RegPwr HT CTL CTL_U CTL_L DFS 1 2412g 20 0 0 0 N 1 2412b 20 0 0 0 N 2 2417g 20 0 0 0 N 2 2417b 20 0 0 0 N 3 2422g 20 0 0 0 N 3 2422b 20 0 0 0 N 4 2427g 20 0 0 0 N 4 2427b 20 0 0 0 N 5 2432g 20 0 0 0 N 5 2432b 20 0 0 0 N 6 2437g 20 0 0 0 N 6 2437b 20 0 0 0 N 7 2442g 20 0 0 0 N 7 2442b 20 0 0 0 N 8 2447g 20 0 0 0 N 8 2447b 20 0 0 0 N 9 2452g 20 0 0 0 N 9 2452b 20 0 0 0 N 10 2457g 20 0 0 0 N 10 2457b 20 0 0 0 N 11 2462g 20 0 0 0 N 11 2462b 20 0 0 0 N 12 2467g 20 0 0 0 N 12 2467b 20 0 0 0 N 13 2472g 20 0 0 0 N 13 2472b 20 0 0 0 N wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36 Mbps 48Mbps 54Mbps wifi0: mac 15.0 phy 7.0 radio 10.2 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Use hw queue 7 for UAPSD wifi0: Atheros 5212: mem=0x1a000000, irq=25 hw_base=0xba000000 insmod: add-symbol-file build/debug/tntfs.o 0xc0300000 -s .data 0xc037cf20 -s .b ss 0xc037d8a0 Tuxera NTFS driver 3010.6.18 [Flags: R/W MODULE]. Searching for flash-layout... Found flash-layout at fffc00 Press ESC to enter BOOT MENU mode. Read section: 3 Write section: 4 MAC 1 [00:60:3B:10:8B:D3] assigned to br0 MAC 0 [00:60:3B:10:8B:D2] assigned to eth1 MAPS: 00400000-007e0000 r-xp 00000000 00:08 2257544 /mnt/cramfs/bin/openrg 10000000-10066000 rw-p 003e0000 00:08 2257544 /mnt/cramfs/bin/openrg 10066000-10227000 rwxp 10066000 00:00 0 [heap] 2aaa8000-2aaad000 r-xp 00000000 00:08 5438292 /mnt/cramfs/lib/ld-uClibc-0.9.2 9.so 2aaad000-2aaae00 insmod: add-symbol-file build/debug/log_chardev.o 0xc008c000 -s .data 0xc008c870 -s .bss 0xc008c9c0 0 rw-p 2aaad000 00:00 0 2aaed000-2aaee000 rw-p 00005000 00:08 5438292 /mnt/cramfs/lib/ld-uClibc-0.9.2 9.so 2aaee000-2ab2f000 r-xp 00000000 00:08 6239816 /mnt/cramfs/lib/libcups.so 2ab2f000-2ab6f000 ---p 2ab2f000 00:00 0 2ab6f000-2ab72000 rw-p 00041000 00:08 6239816 /mnt/cramfs/lib/libcups.so 2ab72000-2ab73000 rw-p 2ab72000 00:00 0 insmod: add-symbol-file build/debug/hw_qos_ikanos_mod.o 0xc005c000 -s .data 0xc0 05c270 -s .bss 0xc005c3c0 2ab73000-2ab86000 r-xp 00000000 00:08 6475596 /mnt/cramfs/lib/libopenrg.so 2ab86000-2abc5000 ---p 2ab86000 00:00 0 2abc5000-2abc6000 rw-p 00012000 00:08 6475596 /mnt/cramfs/lib/libopenrg.so 2abc6000-2ac0b000 r-xp 00000000 00:08 6356264 /mnt/cramfs/lib/libjutil.so 2ac0b000-2ac4a000 ---p 2ac0b000 00:00 0 2ac4a000-2ac50000 rw-p 00044000 00:08 6356264 /mnt/cramfs/lib/libjutil.so 2ac50000-2ac56000 rw-p 2ac50000 00:00 0 2ac56000-2ac92000 r-xp 00000000 00:08 6542920 /mnt/cramfs/lib/libssl.so 2ac92000-2acd1000 ---p 2ac92000 00:00 0 2acd1000-2acd5000 rw-p 0003b000 00:08 6542920 /mnt/cramfs/lib/libssl.so 2acd5000-2add6000 r-xp 00000000 00:08 5929840 /mnt/cramfs/lib/libcrypto.so 2add6000-2ae15000 ---p 2add6000 00:00 0 2ae15000-2ae28000 rw-p 00100000 00:08 5929840 /mnt/cramfs/lib/libcrypto.so 2ae28000-2ae2b000 rw-p 2ae28000 00:00 0 2ae2b000-2ae2d000 r-xp 00000000 00:08 6352872 /mnt/cramfs/lib/libdl-0.9.29.so 2ae2d000-2ae6c000 ---p 2ae2d000 00:00 0 2ae6c000-2ae6d000 rw-p 00001000 00:08 6352872 /mnt/cramfs/lib/libdl-0.9.29.so 2ae6d000-2ae80000 r-xp 00000000 00:08 6523336 /mnt/cramfs/lib/librg_config.so 2ae80000-2aebf000 ---p 2ae80000 00:00 0 2aebf000-2aec1000 rw-p 00012000 00:08 6523336 /mnt/cramfs/lib/librg_config.so 2aec1000-2aec2000 rw-p 2aec1000 00:00 0 2aec2000-2aedd000 r-xp 00000000 00:08 6445636 /mnt/cramfs/lib/lib insmod: add-symbol-file build/debug/igmp_proxy_mod.o 0xc008e000 -s .data 0xc0095 0d0 -s .bss 0xc0095200 m-0.9.29.so 2aedd000-2af1d000 ---p 2aedd000 00:00 0 2af1d000-2af1e000 rw-p 0001b000 00:08 6445636 /mnt/cramfs/lib/libm-0.9.29.so 2af1e000-2af20000 r-xp 00000000 00:08 6714064 /mnt/cramfs/lib/libutil-0.9.29. so 2af20000-2af5f000 ---p 2af20000 00:00 0 2af5f000-2af60000 rw-p 00001000 00:08 6714064 /mnt/cramfs/lib/libutil-0.9.29. so 2af60000-2afa8000 r-xp 00000000 00:08 6621428 /mnt/cramfs/lib/libuClibc-0.9.2 9.so 2afa8000-2afe8000 ---p 2afa8000 00:00 0 2afe8000-2afe9000 rw-p 00048000 00:08 6621428 /mnt/cramfs/lib/libuClibc-0.9.2 9.so 2afe9000-2afed000 rw-p 2afe9000 00:00 0 7fda6000-7fdbb000 rwxp 7fda6000 00:00 0 [stack] insmod: add-symbol-file build/debug/rg_usfs.o 0xc020c000 -s .data 0xc020cf40 -s .bss 0xc020d0a0 insmod: add-symbol-file build/debug/tcp_mss.o 0xc005a000 -s .data 0xc005a5c0 -s .bss 0xc005a720 insmod: add-symbol-file build/debug/rg_ipv4.o 0xc020a000 -s .data 0xc020a200 -s .bss 0xc020a360 IPV4 device driver registered insmod: add-symbol-file build/debug/kleds_mod.o 0xc0208000 -s .data 0xc0208bf0 - s .bss 0xc0208dc0 insmod: add-symbol-file build/debug/pppoe_relay.o 0xc0215000 -s .data 0xc0217c80 -s .bss 0xc0217da0 insmod: add-symbol-file build/debug/rg_pppoe_relay.o 0xc0212000 -s .data 0xc0212 6c0 -s .bss 0xc0212820 insmod: add-symbol-file build/debug/rtp.o 0xc0232000 -s .data 0xc02347a0 -s .bss 0xc0234900 insmod: add-symbol-file build/debug/phone_mod.o 0xc025d000 -s .data 0xc025f0f0 - s .bss 0xc025f320 insmod: add-symbol-file build/debug/jtimer.o 0xc022c000 -s .data 0xc022c480 -s . bss 0xc022c5e0 insmod: add-symbol-file build/debug/btn.o 0xc022e000 -s .data 0xc022e6e0 -s .bss 0xc022e880 insmod: add-symbol-file build/debug/qos_ingress.o 0xc0230000 -s .data 0xc0230aa0 -s .bss 0xc0230c00 insmod: add-symbol-file build/debug/fusiv_jdsp_mod.o 0xc0285000 -s .data 0xc029b 1a0 -s .bss 0xc029b5c0 DSP218X support module loaded insmod: add-symbol-file build/debug/wlan_scan_ap.o 0xc0266000 -s .data 0xc0267f8 0 -s .bss 0xc02680a0 insmod: add-symbol-file build/debug/wan_mirroring.o 0xc0236000 -s .data 0xc0236d 10 -s .bss 0xc0236e80 insmod: add-symbol-file build/debug/marvell_switch.o 0xc037f000 -s .data 0xc03ad 6f0 -s .bss 0xc03ae580 MARVELL switch module loaded SUCCESSFULLY insmod: add-symbol-file build/debug/icplus.o 0xc020f000 -s .data 0xc0210600 -s . bss 0xc0210800 ICPlus module loaded SUCCESSFULLY Freeing CRAMFS/MODFS memory: 1152k freed Using Asterisk version 1.2.4 device eth0 entered promiscuous mode device ath0 entered promiscuous mode Loading Asterisk (manager) pid 68: ..... done. Asterisk MAPS: 00400000-0065d000 r-xp 00000000 00:08 24104 /mnt/cramfs/bin/asterisk 10000000-10011000 rw-p 0025d000 00:08 24104 /mnt/cramfs/bin/asterisk 10011000-1002f000 rwxp 10011000 00:00 0 [heap] 2aaa8000-2aaad000 r-xp 00000000 00:08 5438292 /mnt/cramfs/lib/ld-uClibc-0.9.2 9.so 2aaad000-2aaae000 rw-p 2aaad000 00:00 0 2aaed000-2aaee000 rw-p 00005000 00:08 5438292 /mnt/cramfs/lib/ld-uClibc-0.9.2 9.so 2aaee000-2ab09000 r-xp 00000000 00:08 6445636 /mnt/cramfs/lib/libm-0.9.29.so 2ab09000-2ab49000 ---p 2ab09000 00:00 0 2ab49000-2ab4a000 rw-p 0001b000 00:08 6445636 /mnt/cramfs/lib/libm-0.9.29.so 2ab4a000-2ab4b000 r-xp 00000000 00:08 6522604 /mnt/cramfs/lib/libresolv-0.9.2 9.so 2ab4b000-2ab8a000 ---p 2ab4b000 00:00 0 2ab8a000-2ab8b000 rw-p 00000000 00:08 6522604 /mnt/cramfs/lib/libresolv-0.9.2 9.so 2ab8b000-2ab92000 r-xp 00000000 00:08 6499856 /mnt/cramfs/lib/libopenrg_gpl.s o 2ab92000-2abd1000 ---p 2ab92000 00:00 0 2abd1000-2abd2000 rw-p 00006000 00:08 6499856 /mnt/cramfs/lib/libopenrg_gpl.s o 2abd2000-2abe1000 r-xp 00000000 00:08 6507636 /mnt/cramfs/lib/libpthread-0.9. 29.so 2abe1000-2ac20000 ---p 2abe1000 00:00 0 2ac20000-2ac25000 rw-p 0000e000 00:08 6507636 /mnt/cramfs/lib/libpthread-0.9. 29.so 2ac25000-2ac27000 rw-p 2ac25000 00:00 0 2ac27000-2ac6f000 r-xp 00000000 00:08 6621428 /mnt/cramfs/lib/libuClibc-0.9.2 9.so 2ac6f000-2acaf000 ---p 2ac6f000 00:00 0 2acaf000-2acb0000 rw-p 00048000 00:08 6621428 /mnt/cramfs/lib/libuClibc-0.9.2 9.so 2acb0000-2acb4000 rw-p 2acb0000 00:00 0 7ebfa000-7ec00000 rwxp 7ebfa000 00:00 0 7edfa000-7ee00000 rwxp 7edfa000 00:00 0 7effc000-7f000000 rwxp 7effc000 00:00 0 7f1fc000-7f200000 rwxp 7f1fc000 00:00 0 7f9e1000-7f9f6000 rwxp 7f9e1000 00:00 0 [stack] Loading Asterisk OpenRG Interface for Events Loading Asterisk OpenRG Interface for Commands Initializing Slic and Voice Wait Queues (max slics channels 2) Initializing SPI Module (TNV3) Slic Product Code: 0x04 0xB3 Slic Card Detected : => Legerity88266 Initializing Slics (country Italy_FastWeb) Activating channel: 0 1 Enable IRQ for DSP 0 Enable IRQ for DSP 1 DSP System Initialized T38 thread started (pid 81)